Dangerous products, which do not meet the current legislation laying down essential health and safety requirements, have been placed on the market in the European Union. The Labour Inspection Department of the Ministry of Labour and Social Insurance informs employers, self-employed persons and the consuming public that according to information registered in the Rapid Information Exchange System (RAPEX) the following products are dangerous.
MACHINERY
1. Laser processing machine of Chinese origin
RAPEX Report. Notification A12/00995/22 [https:/ec.europa.eu/safety-gate-alerts/screen/webReport/alertDetail/10006410]
The installed laser machine protection window is not sufficiently protective (measured protection level 0,02 instead of the required level of at least 4). Reflected or diffuse laser radiation may freely escape from the machine work area and cause damage to the vision of the machine operator and/or third persons.
The product, shown here, does not comply with the requirements of the Machinery Directive 2006/42/EC nor with European Standard EN 11553.
2. Circular saw blade of Chinese origin
(concerns 17 products with items as shown in Table 1)
The circular saw blade can be mounted on an angular bearing (chisel) and could therefore, contrary to its intended use, be used as a hand-held circular saw. Consequently, this is likely to cause kickback or loss of control of the tool, resulting in injury to the user.
The product is sold electronically.
The product does not comply with the requirements of the Machinery Directive nor with European Standard EN 60745-2-3.
EQUIPMENT FOR USE IN EXPLOSIVE atmospheres
Smart phone/smart device for use in explosive atmospheres of Chinese origin
(concerns 6 products with items as shown in Table 2)
The device does not meet the design requirements for intrinsic safety required for use in potentially explosive atmospheres. The output power is excessive and the battery is not adequately protected. This increases the risk of ignition in explosive atmospheres.
The product is sold electronically.
The product does not comply with the requirements of the ATEX Directive nor with European Standard EN 60079-11.
PERSONAL PROTECTION MEASURES
1. Particulate filter mask of unknown origin
RAPEX Report: Report 27, No. Notification A12/00945/22 [https:/ec.europa.eu/safety-gate-alerts/screen/webReport/alertDetail/10006376]
Particle retention by the filter is insufficient (measured values ≤ 46%). In addition, one of the two filter layers does not provide full coverage. Consequently, the product does not meet the health and safety requirements and therefore, even when combined with other recommended measures, may not adequately protect.
The product, shown here, does not comply with the Regulation on personal protective equipment, nor with European Standard EN 149.
2. Particle filter mask of Chinese origin
RAPEX Report. Notification INFO/00106/22 [https:/ec.europa.eu/safety-gate-alerts/screen/webReport/alertDetail/10006284]
The product is CE marked but its filtering ability has not been tested by a European conformity assessment body. Consequently, it has not been documented that the product meets health and safety requirements and therefore, even when combined with other recommended measures, may not adequately protect.
The product, shown here, does not comply with the Personal Protective Equipment Regulation, nor with European Standard EN 149.
Further information on the above products is listed on the RAPEX website: Safety Gate for dangerous non-food products
The Labour Inspection Department invites the consumer public, in case it detects the above products in the Cypriot market, to inform the competent officers of the Department at 22405663 or 22405603 or 22405604.
Contents of this article including associated images are belongs PIO
Views & opinions expressed are those of the author and/or PIO
Source