What's new

[PIO] Announcement by the Ministry of Transport, Communications and Works regarding the Tension-Stretch Pilot Project

29451.jpg





The Minister of Transport, Communications and Works, Mr. Yiannis Karousos, inspected today, Monday 1 August 2022, in the presence of the Mayor of Nicosia, Mr. Constantinos Yiorkatzis, the first three bus stops/bus shelters that were installed in Lefkosia Avenue. Makarios III (commercial triangle) in Nicosia.

These bus stops/shelters are pilot samples of the bus stops/shelters to be installed in Greater Cyprus within the framework of the project for the upgrading of infrastructure, bus stops and bus shelters throughout Cyprus, with a total value of EUR 60 million (plus VAT), including 15 years of maintenance and extensions, for which the tender is currently underway.

The uniform design of the bus stops/shelters was prepared by Demades Design Ltd, Industrial Designers, with whom the Department of Public Works was contracted following an open tender and takes into account the conditions and data of Cyprus and achieves uniformity, expandability to adapt to available space and usage needs, accessibility for disabled use, safety and weather protection, lighting, use of renewable energy sources and technology.

The purpose of the prototype samples, which were constructed by the project's industrial designer, is to confirm the correctness of the design and requirements of the major project scope, as well as the correctness of materials and construction method.

The installation of the first stops/shelters of the Project on a nationwide scale is expected to start in early 2023 and includes installation

  1. 350 pylons with embedded technology,
  2. 2.000 simple pylons,
  3. 1.350 small towers,
  4. 650 large towers for urban areas,
  5. 100 large towers suitable for mountain areas,
  6. repair and re-installation of more than 600 existing towers,
  7. photovoltaic systems and connection to a fixed electricity supply, and
  8. 200 cycle racks and bicycle stands in central locations to encourage the use of bicycles and multimodal transport by sustainable means.

The tender for this project is being conducted in two stages and so far the evaluation of the first stage has been completed. 11 economic operators have expressed interest in this tender, of which those who meet the participation criteria will be invited to submit a full Technical and Financial Offer, as well as a sample roof as a demonstration of their technical capacity.

The project is co-financed by the European Regional Development Fund THALIA at 65% and by national resources at 35% and is part of the upgrading of public passenger transport infrastructure, with the ultimate aim of providing an improved and increased service to public transport users.

The project falls within the objectives of the strategic plans of the Republic of Cyprus, including the Ministry of Transport, Communications and Works, the State Ministry of Tourism, Municipalities and Communities and is an integral part of the specialised planning for the transition to sustainable mobility and green growth.

Type C Housing:

Main Specifications

  1. Metal frame clad with aluminium panels
  2. Roof-mounted photovoltaic panels for autonomy and with connection to the AEC
  3. Led lighting covering all areas and surfaces of the roof [*]Glass at the back of the roof [*]LightBox within the housing and integrated in the pylon for information material on route programmes [*]Information displayinkpaper for passenger information regarding arrival time of buses [*]Double-sided advertising rack [*]Metal seat covered with wood

Type B shelter:

(To be installed when there is not enough space to install a Type C canopy or there is a restriction due to shops/houses or other developments).

Main Specifications

  1. Metal frame clad with aluminium panels
  2. Photovoltaic panels on the roof for autonomy and with the possibility of connection to the AEC
  3. Led lighting covering all areas and surfaces of the shelter
  4. LightBox in the pillar for route program information material
  5. Information displayinkpaper for information passengers regarding bus arrival time
  6. Metal seat covered with wood

Type A bus stop:

(To be installed when there is not enough space to install a Type C canopy and conditions do not permit the installation of a Type B canopy either)

Main Specifications:

  1. Metal frame clad with aluminium panels
  2. Photovoltaic panel for autonomy and with possibility of connection to the AEC
  3. Led lighting covering all areas and surfaces of the stand [*]LightBox on the pylon for information route programme material [*]Information displayinkpaper for informing passengers about bus arrival times

(ΘΓ/ΜΓ/ΙΚ)
Contents of this article including associated images are owned by PIO
Views & opinions expressed are those of the author and/or PIO

Source

 
Back
Top